Most meter base repairs follow the same path: the electrician diagnoses the problem, the utility pulls the meter, the base is replaced or repaired, and an inspection allows reconnection. Call the number on this page to be connected with a local electrician in Chandler.

When the utility steps in
Sometimes a utility technician finds a damaged base while reading or servicing the meter and tags it, or declines to reconnect until it is repaired. That notice is the trigger. Bring it to the electrician so the repair matches what the utility requires.
Underground versus overhead feeds
Houses fed from underground conduit have a base connected to buried wires, while overhead homes use a mast. Each has its own failure patterns, from cracked conduit and water entry to strain on the mast. The repair plan fits the type of service you have.
Two utilities serve parts of Chandler; your bill shows which one owns your meter, and the repair steps depend on that utility.
Utility and electrician each have a part
The electrician bills for the base, the work on your side and the permit. The utility handles pulling and reinstalling the meter and may have its own requirements. Ask the electrician what to expect so you can plan the sequence and any related costs.
Inspection before reconnection
On many repairs, the local office or the utility will not allow reconnection until the work is inspected. The inspector checks the base's rating, the grounding and how it is anchored. The electrician should walk you through where things stand.
Local details for Chandler
Electric service here is split between APS and SRP, so check your bill before reporting an outage. APS's outage line is 602-371-3680.
Call 911 first for smoke, flames or a burning smell from wiring, and do it from outside. Report a line on the ground to 911 and the utility, and keep roughly 100 feet away from it.
Electrical permits for Chandler addresses go through Chandler Development Services. Panel and service upgrades, new circuits and generator hookups usually need one, followed by an inspection.
Arizona's handyman exemption does not cover jobs that need a permit, so panel work, new circuits and similar jobs belong with a contractor who holds an ROC electrical license (R-11 or CR-11).
Service upgrades need the utility as well as the city or county: the utility disconnects and reconnects power and decides where the meter goes.
Electricians who take calls here often also work in Gilbert, Mesa and Tempe.
Sparks, smoke or fire
If the meter is sparking, smoking or on fire, get everyone out and call 911. Do not use water on it. The fire department will decide when it is safe, and the utility will shut off power at the source before any repair can begin.
Around Chandler
Calls come in from across Chandler, including around Loop 101 (Price Freeway), Loop 202 (Santan Freeway), Interstate 10.
Chandler has historic districts including Silk Stocking, Southside Village and Historic Downtown; properties generally qualify for historic status at 50 years or older.
Meter Base & Service Mast Repair questions in Chandler
Who repairs the meter base, the utility or an electrician?
Why did the utility tag my meter?
How do I find out who owns my meter?
Can a meter base problem cause flickering lights?
More electrical services in Chandler
Meter Base & Service Mast Repair nearby
Helpful guides
Sources
Last updated: