Recessed lighting means lights set into the ceiling, usually fed by cable run through the attic. An electrician plans the spacing, cuts openings, wires the lights to a switch or dimmer and checks the fixtures are rated for the insulation above. Call the number on this page to be connected with a local electrician in Chandler.

When recessed lighting makes sense
Recessed lights suit rooms where a single center fixture leaves dark corners: kitchens, hallways, family rooms, and spaces with low or flat ceilings. They add even light without hanging anything down, which is why they are popular in remodels. Ceilings of every height can take them.
Color temperature and solar-lit rooms
Bright desert sun shifts how a room looks at dusk. Warm LEDs feel natural in the evening, while cooler tones suit work areas. Choosing one color temperature across a room keeps the lights from looking mismatched. Details like these are easy to miss from the floor.
Whether your bill comes from APS or SRP, the lights are installed and wired the same way past the meter.
Adding switches and dimmers
One switch can run a whole group, but several zones need extra switch legs and wire. Dimmers add a little cost and must suit the lights. Deciding on zones before the work starts keeps the quote accurate. Sharing photos of the attic helps with accuracy.
What the room looks like afterward
Plan for some dust, small patches around openings and a clean-up at the end. After testing, the electrician should show you how the switches and dimmers behave and leave you with the fixture details for later bulb or module replacement. Photos of the finished layout can help with future changes.
Useful local contacts for Chandler
Electric service here is split between APS and SRP, so check your bill before reporting an outage. APS's outage line is 602-371-3680.
Two situations skip the electrician entirely: fire signs (smoke, sparks, a hot or burning odor), which mean leaving and calling 911, and downed lines, which mean staying about 100 feet back and calling 911 and the utility.
Electrical permits for Chandler addresses go through Chandler Development Services. Panel and service upgrades, new circuits and generator hookups usually need one, followed by an inspection.
In Arizona, electrical contractors need a license from the Registrar of Contractors (ROC). Residential electrical work falls under the R-11 class, and the ROC's online contractor search shows whether a license is active.
Calls from Chandler are often matched with electricians who also cover Gilbert, Mesa and Tempe.
When a recessed light is urgent
A light that will not turn on can wait for a scheduled visit. A fixture that is hot, smoking, sparking or smelling of burn cannot: switch off its breaker only if it is safe, step outside and call 911 for any sign of fire. Quality parts and proper installation make the difference.
More about Chandler
Calls come in from across Chandler, including around Loop 101 (Price Freeway), Loop 202 (Santan Freeway), Interstate 10.
Chandler has historic districts including Silk Stocking, Southside Village and Historic Downtown; properties generally qualify for historic status at 50 years or older.
Recessed Lighting questions in Chandler
What does IC-rated mean?
Why do my recessed lights flicker?
Can I dim recessed LED lights?
Is it better to use cans or slim discs?
More electrical services in Chandler
Recessed Lighting nearby
Helpful guides
Sources
Last updated: