Electrician referrals for Phoenix & nearby townsCall: (602) 584-7286
(602) 584-7286

Aluminum Wiring Repair in Glendale, AZ

electricianphoenixaz.net

Aluminum wiring is mostly a connection problem, and a local electrician can tell you what is needed for your Glendale home.

Inspector flagged aluminum wire in Glendale?
Call now to be connected with a local electrician in Glendale.
(602) 584-7286

Warm cover plates, flickering lights, a plastic smell or devices that stop working can point to a failing aluminum connection. If you notice a burning smell or heat, leave the house and call 911 first. Call the number on this page to be connected with a local electrician in Glendale.

Connecting wires in an outlet box, aluminum wiring repair in Glendale, AZ

Why connections are the weak point

Aluminum expands and contracts more than copper as it heats and cools. Over years, screw terminals can loosen, and a loose joint heats up under load. That heat is what the Consumer Product Safety Commission warns about, so an electrician focuses on the terminals more than on the wire itself.

Mixed copper and aluminum

Many houses have aluminum branch circuits but copper in the fixtures, switches or later additions. Joining the two metals incorrectly causes corrosion and loose joints. An electrician looks for these mixed connections, which are among the most common places for aluminum problems to start.

Homes from the 1980s sit close to the years aluminum branch wiring was used, so a quick look at the attic cable is a reasonable first step.

Call now to be connected with a local electrician in Glendale.
(602) 584-7286

Local details for Glendale

Check the electric bill to see which utility serves the property; around the Valley it is most often APS or SRP. Outage reports go to that utility, which posts its numbers online.

Safety comes first: a burning smell, smoke or sparks from wiring means leave the house and call 911. A downed line is the utility's job, never an electrician's; keep 100 feet back, call 911 and then report it to the utility.

Electrical permits for Glendale addresses go through Glendale Building Safety. Panel and service upgrades, new circuits and generator hookups usually need one, followed by an inspection.

Arizona's handyman exemption does not cover jobs that need a permit, so panel work, new circuits and similar jobs belong with a contractor who holds an ROC electrical license (R-11 or CR-11).

Nearby, the same kind of help is available in Peoria, Sun City and Youngtown.

Hidden extras

Opening up older work sometimes reveals cracked insulation, scorched boxes or unrelated wiring errors. These add scope but are better found now than later. A good electrician explains them clearly and gets your approval before adding to the job.

Questions to ask the pro

Ask which method is planned, how many connection points they expect to treat, whether the panel is included, whether a permit applies, and what they will do if they find other wiring problems. Check the ROC number before you agree to anything.

Maintaining a repaired system

After repair, avoid overloading circuits and pay attention to warm plates, flicker or odd smells. An occasional electrician check, especially before a remodel or after a big storm, keeps small trouble from growing. Repaired connections are better, but they are not an excuse to stop watching.

More about Glendale

Calls come in from across Glendale, including around Loop 101, 51st Avenue, Mohawk Drive.

Catlin Court Historic District in Glendale is a National Register neighborhood subdivided in 1914 whose homes are mostly bungalows from that period, so older wiring is likely in the historic core.

Aluminum Wiring Repair questions in Glendale

Is aluminum wiring dangerous?
It can be if connections are loose or were done with the wrong parts. Repairing the connections addresses the main risk, and an electrician can evaluate your home.
Does aluminum wiring have to be replaced?
Not always. Many homes are repaired at the connection points. Replacement is considered when the wire is damaged or when repair would touch so many points that rewiring makes sense.
What is pigtailing?
It means joining a short copper wire to each aluminum wire with an approved connector and then wiring the device to the copper. It moves the sensitive joint into a protected splice.
How long does the repair take?
It depends on the number of connection points and the access to them. An electrician can estimate the schedule after inspecting the home.

More electrical services in Glendale

Aluminum Wiring Repair nearby

Call now to be connected with a local electrician in Glendale.
(602) 584-7286

Last updated:

☎ Call (602) 584-7286