The meter base, also called the meter socket, is the box on the outside of the house that holds the utility's meter. The electrician repairs the base and wiring on your side, while the utility removes and reinstalls the meter itself. Call the number on this page to be connected with a local electrician in Laveen.

Heat marks and discolored jaws
When a meter is removed, burned or blackened jaws are a sign of poor contact that overheated over time. Often the first sign is a brown stain around the glass or a faint plastic smell. These faults tend to progress, so schedule a repair promptly.
New loads, old base
Meter bases have an amp rating, and adding solar, a charger or a second AC can push a base beyond its limit. If the rating is too low or the base is damaged, it may need replacement before other upgrades can go forward.
What shapes a meter base repair quote
Price depends on whether the base can be repaired or must be replaced, the amp rating, the type of service, whether the mast or conduit needs work, and what the wall looks like around it. Permit and inspection fees may also apply.
Useful local contacts for Laveen
Check the electric bill to see which utility serves the property; around the Valley it is most often APS or SRP. Outage reports go to that utility, which posts its numbers online.
If you see sparks, smoke or flames, or smell something burning from an outlet, switch or panel, get everyone out and call 911 before anything else. For a power line on the ground, stay at least 100 feet away, call 911, then call the utility.
If the job involves a new panel, added circuits or an EV charger, expect a permit and inspection through Phoenix Planning and Development.
The Arizona Registrar of Contractors issues electrical licenses and lets anyone check a contractor's status online. A one-minute lookup before signing is worth it.
Solar, battery and some generator setups need the utility's approval before they are connected. Electricians who do this work handle the application.
Nearby, the same kind of help is available in Avondale, Tolleson and Goodyear.
How a meter base repair usually runs
- The electrician examines the base, mast and wiring.
- The permit and the utility visit are arranged.
- The utility removes the meter and cuts power.
- The base is repaired or replaced and rewired.
- Inspection, then the utility reinstalls the meter.
Sparks, smoke or fire
If the meter is sparking, smoking or on fire, get everyone out and call 911. Do not use water on it. The fire department will decide when it is safe, and the utility will shut off power at the source before any repair can begin.
Meter Base & Service Mast Repair questions in Laveen
What is a meter base?
Why did the utility tag my meter?
What if the mast is leaning or pulled away?
Will stucco need patching after the work?
More electrical services in Laveen
Meter Base & Service Mast Repair nearby
Helpful guides
Sources
Last updated: