Damage such as burn marks, cracks, melted jaws, rust or a loose box needs prompt attention. Never touch a damaged meter base. If you see sparks or smoke, call 911 first. Call the number on this page to be connected with a local electrician in New River.

Do not wait on a smell
If you smell burning near the meter or see smoke or sparks, move away from the house and call 911 first. Once the situation is safe, call the utility, which owns the meter, and then a local electrician to repair the base and the wiring past it.
Heavy AC demand on the jaws
The meter jaws carry the entire house load, and in summer that is mostly air conditioning running for long stretches. Any weak contact heats up under that continuous draw. A base that was fine in winter can fail in the hottest months.
Large desert lots here often have a meter at a pole or pedestal some distance from the house, so the electrician may have more than one service point to inspect.
Utility and electrician each have a part
The electrician bills for the base, the work on your side and the permit. The utility handles pulling and reinstalling the meter and may have its own requirements. Ask the electrician what to expect so you can plan the sequence and any related costs.
Who touches what
Only the utility handles the meter itself and the lines up to it. The electrician works on the base and everything after. Neither will cross that line, so a repair needs coordination. Expect the electrician to call the utility or submit a request.
Before electrical work starts in New River
Power outages and street-side line problems belong to the utility, and in most of the metro that means APS or SRP. The name on the bill settles which one.
Two situations skip the electrician entirely: fire signs (smoke, sparks, a hot or burning odor), which mean leaving and calling 911, and downed lines, which mean staying about 100 feet back and calling 911 and the utility.
Electrical permits for New River addresses go through Maricopa County Planning and Development. Panel and service upgrades, new circuits and generator hookups usually need one, followed by an inspection.
The Arizona Registrar of Contractors issues electrical licenses and lets anyone check a contractor's status online. A one-minute lookup before signing is worth it.
Work on the meter or service entrance also involves the utility, which controls the meter and must approve service changes. Your electrician coordinates that step.
Electricians who take calls here often also work in Glendale, Cave Creek and Carefree.
Treat a damaged meter as live
The wires feeding the meter base are energized by the utility and cannot be shut off at your panel. Do not open the cover, pull the meter or poke at a loose box. Even a cracked base can expose live parts. Keep children and pets away from it.
Meter Base & Service Mast Repair questions in New River
Does a meter base repair need a permit?
Why did the utility tag my meter?
Do I need a bigger meter base for solar or a charger?
How do I find out who owns my meter?
More electrical services in New River
Meter Base & Service Mast Repair nearby
Helpful guides
Sources
Last updated: