A pool or spa that trips its GFCI, hums without turning or shows lights that flicker usually has a wiring, motor or moisture problem. Sorting out which one takes testing equipment. Call the number on this page to be connected with a local electrician in Paradise Valley.

After a monsoon storm
Dust, wind and lightning leave pool equipment with their own set of problems. A pump that quit after a storm, a spa that will not turn on, or a GFCI that now trips constantly may have taken a surge or water intrusion. Switch the equipment off and let an electrician test the circuit before it is restarted.
Backyard living adds circuits
Outdoor kitchens, misters, string lighting, a spa and a pool all compete for the same few breakers in many yards. Overloaded backyard circuits trip often in summer, when everything runs at once. Spreading the load across dedicated, GFCI-protected circuits is a typical fix, and it can involve trenching.
Parts of Paradise Valley are served by different utilities. The bill names yours, and it helps to know before a larger pool electrical project begins.
Repair versus new installation
Replacing a failed GFCI breaker or a corroded connection is a small repair. Running a new circuit to a spa, relocating equipment or adding a subpanel for a pool project is much larger. Describe which one you are facing, and the electrician can give a rough sense of the range before visiting.
Working alongside your pool service
Electricians and pool technicians each handle one side. The electrician owns the wiring, breaker, bonding and GFCI; the pool service owns the pump hydraulics, the heater's gas or refrigerant side and the chemistry. On bigger jobs the two coordinate so equipment is not connected before the circuit is ready.
Small habits that help
Press the test button on pool and spa GFCI devices every month or so and confirm they trip and reset. Keep a record of equipment labels. Leave the pool dark if the lights flicker. And call a local electrician before the season, not after a failure, if you plan to add equipment.
Local details for Paradise Valley
Two utilities serve Paradise Valley: APS and SRP. The name on your bill tells you which one to call when the power goes out; APS takes outage reports at 602-371-3680.
If you see sparks, smoke or flames, or smell something burning from an outlet, switch or panel, get everyone out and call 911 before anything else. For a power line on the ground, stay at least 100 feet away, call 911, then call the utility.
Electrical permits for Paradise Valley addresses go through Paradise Valley Community Development. Panel and service upgrades, new circuits and generator hookups usually need one, followed by an inspection.
Arizona's handyman exemption does not cover jobs that need a permit, so panel work, new circuits and similar jobs belong with a contractor who holds an ROC electrical license (R-11 or CR-11).
Calls from Paradise Valley are often matched with electricians who also cover Scottsdale, Tempe and Mesa.
Pool & Spa Electrical questions in Paradise Valley
Can I replace a pool pump motor myself?
Can pool equipment run on an extension cord?
Should I turn the pool off during a monsoon storm?
Can a pool heater run from the same circuit as the pump?
More electrical services in Paradise Valley
Pool & Spa Electrical nearby
Helpful guides
Sources
Last updated: