The meter base, also called the meter socket, is the box on the outside of the house that holds the utility's meter. The electrician repairs the base and wiring on your side, while the utility removes and reinstalls the meter itself. Call the number on this page to be connected with a local electrician in Peoria.

Heat marks and discolored jaws
When a meter is removed, burned or blackened jaws are a sign of poor contact that overheated over time. Often the first sign is a brown stain around the glass or a faint plastic smell. These faults tend to progress, so schedule a repair promptly.
Solar and net metering equipment
Homes with rooftop solar often have disconnects and special meters near the base. These add connections and mounting points that can be damaged by weather or poor work. The electrician checks that everything is secure and sized properly while repairing the base.
Bundled upgrades save visits
If the base is failing and the panel is also old or small, doing both at once can reduce repeat work. An electrician can price a base replacement alone and as part of a service upgrade, which lets you compare without committing to the larger job.
Utility, permits and safety in Peoria
Most homes in the Phoenix area get power from APS or SRP, and your bill shows which one serves your address. Both post outage and downed-line numbers on their websites.
Call 911 first for smoke, flames or a burning smell from wiring, and do it from outside. Report a line on the ground to 911 and the utility, and keep roughly 100 feet away from it.
If the job involves a new panel, added circuits or an EV charger, expect a permit and inspection through Peoria Development Services.
In Arizona, electrical contractors need a license from the Registrar of Contractors (ROC). Residential electrical work falls under the R-11 class, and the ROC's online contractor search shows whether a license is active.
Solar, battery and some generator setups need the utility's approval before they are connected. Electricians who do this work handle the application.
Electricians who take calls here often also work in Glendale, Youngtown and Sun City.
If the electrician holds an ROC license
A contractor with an ROC license is who pulls the permit and carries out the work. Ask for the ROC number and keep the inspection sign-off. If a contractor says the work needs no permit and no utility visit, treat that as a red flag.
Look from a safe distance
Periodically glance at the meter from a few steps away. Watch for discolored plastic, rust, moisture and a mast that has shifted. Spotting a problem early lets you schedule a repair on your terms, rather than during a summer outage or after a failure.
Around Peoria
Calls come in from across Peoria, including around Loop 303, Grand Avenue, Old Town Peoria.
Old Town Peoria is the original townsite, platted in 1897, with buildings dating back to 1899, so the oldest homes there predate modern electrical systems.
Meter Base & Service Mast Repair questions in Peoria
What if the mast is leaning or pulled away?
Do I need a bigger meter base for solar or a charger?
Is a cracked meter cover a real problem?
How do I find out who owns my meter?
More electrical services in Peoria
Meter Base & Service Mast Repair nearby
Helpful guides
Sources
Last updated: