A panel upgrade swaps the main breaker panel for a new one, often with a higher amperage rating and more breaker spaces. It usually needs a permit and an inspection, and the utility may have to disconnect power briefly. Call the number on this page to be connected with a local electrician in Scottsdale.

Planned additions that outgrow a panel
A panel can be perfectly sound and still be too small. Adding a detached garage, a workshop, a second air conditioner or a charger can use up the last open spaces and push the main breaker close to its limit. That is a capacity question, and a load calculation answers it.
Heat takes a toll on the equipment
Many panels sit on sun-facing stucco walls or inside hot garages. Months of high temperature loosen lugs, age insulation and make breakers more prone to nuisance trips. An electrician checking a panel here often finds heat damage that a milder climate would not cause.
With a median build year of 1990 here, many panels are original or have had circuits added over time, so a load check is a sensible first step.
Service in Scottsdale is split between APS and SRP, and the utility steps for a panel swap depend on which one owns your meter.
Planning for loads you have not added yet
Choosing a panel with extra spaces costs more up front than choosing a tight fit, yet it often saves a second visit when a charger, spa or generator inlet comes along. Tell the electrician what you plan to add in the next few years so the quote sizes the panel sensibly.
Before electrical work starts in Scottsdale
Two utilities serve Scottsdale: APS and SRP. The name on your bill tells you which one to call when the power goes out; APS takes outage reports at 602-371-3680.
Two situations skip the electrician entirely: fire signs (smoke, sparks, a hot or burning odor), which mean leaving and calling 911, and downed lines, which mean staying about 100 feet back and calling 911 and the utility.
Electrical permits for Scottsdale addresses go through Scottsdale's One Stop Shop permit center. Panel and service upgrades, new circuits and generator hookups usually need one, followed by an inspection.
Ask for the contractor's ROC number and look it up on the Arizona Registrar of Contractors search before work begins. Residential electrical is the R-11 class; CR-11 covers both residential and commercial.
Solar, battery and some generator setups need the utility's approval before they are connected. Electricians who do this work handle the application.
Calls from Scottsdale are often matched with electricians who also cover Paradise Valley, Fountain Hills and Mesa.
What the electrician looks at first
Expect questions about your AC units, appliances, pool equipment and future plans. The electrician checks the meter base, service wires, grounding and the condition of the existing circuits. That review decides whether you need a modest panel or a larger service.
Which panels electricians often replace
Certain older brands, such as Federal Pacific Stab-Lok and Zinsco, are ones electricians frequently recommend replacing because their breakers may fail to trip. If you see one of those names on the door, ask an electrician to look at it rather than waiting for a problem.
Electrical Panel Upgrade questions in Scottsdale
What does a panel upgrade involve?
Can a bigger panel fix a breaker that keeps tripping?
Does the house need to be vacant during the work?
Who do I call to schedule the power shutoff?
More electrical services in Scottsdale
Electrical Panel Upgrade nearby
Helpful guides
Sources
Last updated: