Ceiling fan installation means mounting the fan to a box rated to carry its weight and motion, wiring the motor and light, and setting up the switch or remote. Electricians also fix wobble and noise. Call the number on this page to be connected with a local electrician in Sun City.

Nothing in the ceiling yet
If the room has no fixture at all, a fan can still be added. The electrician runs cable from a nearby circuit, installs a fan-rated box in the framing and sets up a wall switch or remote. Attic access makes this considerably easier. Plan the switch location before the fan goes up.
Fans and the electric bill
A fan itself uses very little power compared with air conditioning. Running one in an occupied room and turning it off when you leave is the efficient way to use it, since it cools people rather than the air. Use the fan only while the room is occupied.
Many homes on the same street share the same layout, so electricians who work here know what ceilings and boxes to expect.
New wiring versus existing
If the room already has a switch and cable, a fan goes in readily. If separate control of fan and light is wanted, a new wire between the switch and ceiling may be needed. That is the difference between a quick job and a longer one. Photos of the ceiling and switch help the electrician quote accurately.
After the fan is up
You should get a working fan, a quick demonstration of the remote or switches and the manual for future parts. Remember the direction switch: down-draft in summer and the reverse in winter helps circulate warm air. Ask for the remote or switch to be demonstrated.
Warning signs on a fan you already have
Heavy wobble, a loose canopy, burning smell, humming, sparks or a fan that gets hot call for immediate attention. Turn it off at the wall and the breaker. Call 911 first if there is smoke or fire. Treat any new noise or wobble as a warning.
Utility, permits and safety in Sun City
Most homes in the Phoenix area get power from APS or SRP, and your bill shows which one serves your address. Both post outage and downed-line numbers on their websites.
If you see sparks, smoke or flames, or smell something burning from an outlet, switch or panel, get everyone out and call 911 before anything else. For a power line on the ground, stay at least 100 feet away, call 911, then call the utility.
Permitted electrical work in Sun City is inspected by Maricopa County Planning and Development. The contractor normally applies and schedules the inspection.
Arizona's handyman exemption does not cover jobs that need a permit, so panel work, new circuits and similar jobs belong with a contractor who holds an ROC electrical license (R-11 or CR-11).
Electricians who take calls here often also work in El Mirage, Youngtown and Peoria.
Ceiling Fan Installation questions in Sun City
How much does it cost to install a ceiling fan?
What size fan do I need?
Can I use a standard light box for a ceiling fan?
Why does my fan hum or buzz?
More electrical services in Sun City
Ceiling Fan Installation nearby
Helpful guides
Sources
Last updated: