Most EV chargers at home run on a 240-volt breaker that serves nothing else, and the job usually needs a permit and inspection. The electrician looks at how much load the house already carries, especially the AC, before sizing the circuit. Call the number on this page to be connected with a local electrician in Chandler.

Level 1, Level 2 and what changes at home
For a Chandler household, the cord that comes with most EVs plugs into a regular 120-volt outlet and adds range slowly. Level 2 uses 240 volts, like a dryer or an AC condenser, and refills the battery in a night. That is the setup electricians usually install, and it is why a new circuit is part of the job.
Garage panels in the desert
Many garages in Chandler hold the main panel on a sun-warmed wall, with the car parked a few steps away. That is convenient for a short run. It also means a charger's heavy circuit lands in the same hot space, so spacing and breaker capacity are worth a careful look.
Two utilities serve different parts of Chandler, so check your bill to see which one applies; rate plans and EV programs differ between them.
Why two charger jobs cost different amounts
A charger three feet from a Chandler panel and one at the far end of a long driveway are very different jobs. Wire, conduit, trenching and labor all scale with distance. The charger itself is often the smaller part of the bill, which surprises people who shop only by unit price.
Getting the utility involved
Most simple installs involve no utility visit at all, but a service upgrade, a separate EV meter or a time-of-use plan changes that. Those steps usually need the utility's approval. If one applies to your house, the electrician should say so before the work begins.
Useful local contacts for Chandler
Two utilities serve Chandler: APS and SRP. The name on your bill tells you which one to call when the power goes out; APS takes outage reports at 602-371-3680.
Safety comes first: a burning smell, smoke or sparks from wiring means leave the house and call 911. A downed line is the utility's job, never an electrician's; keep 100 feet back, call 911 and then report it to the utility.
Electrical permits for Chandler addresses go through Chandler Development Services. Panel and service upgrades, new circuits and generator hookups usually need one, followed by an inspection.
Ask for the contractor's ROC number and look it up on the Arizona Registrar of Contractors search before work begins. Residential electrical is the R-11 class; CR-11 covers both residential and commercial.
Work on the meter or service entrance also involves the utility, which controls the meter and must approve service changes. Your electrician coordinates that step.
Nearby, the same kind of help is available in Gilbert, Mesa and Tempe.
Why heat is the real enemy
Hours of steady current warm every connection in the circuit, and a Phoenix garage in summer starts out warm already. Loose terminals and undersized wire are where that heat shows up first. Proper torque on connections and correct wire sizing are inexpensive protection against a problem that escalates.
EV Charger Installation questions in Chandler
Can I plug my EV into a regular outlet?
Can I install a charger outside?
What if my panel has no room for a charger?
Should I add surge protection with a charger?
More electrical services in Chandler
EV Charger Installation nearby
Helpful guides
Sources
Last updated: