The charger is the easy part; the circuit behind it is the job. An independent electrician measures the run from the panel, checks spare capacity, and pulls the permit that most charger installs call for. Call the number on this page to be connected with a local electrician in Tempe.

Plug-in or hardwired
A plug-in charger uses a heavy-duty 240-volt receptacle, which makes it simple to swap or take along if you move. A hardwired unit connects straight to the circuit, which many electricians prefer for higher-power models and outdoor spots. Which one fits depends on the charger you chose and where it mounts.
Heat, AC and a long charging session
A charger can run for hours, and in Tempe it does so in a garage that gets hot in summer. Heat stresses breakers, lugs and connectors, so electricians pay attention to wire size, enclosure rating and how close the panel sits to the car.
Homes of the 1980s generation commonly have older panels and tight garage walls, which can shape where a charger circuit runs and whether the panel needs work.
Utility service here depends on the street, and APS and SRP each have their own steps for upgrades and charger-friendly rate plans.
Useful local contacts for Tempe
Depending on the street, a Tempe home may be on APS or SRP. APS lists 602-371-3680 for outages.
Treat any fallen power line as live. APS and SRP both tell people to stay about 100 feet away and call 911. Inside the house, smoke or a hot burning odor from electrical equipment is also a 911 call, made from outside.
Permitted electrical work in Tempe is inspected by Tempe Building Safety. The contractor normally applies and schedules the inspection.
The Arizona Registrar of Contractors issues electrical licenses and lets anyone check a contractor's status online. A one-minute lookup before signing is worth it.
Solar, battery and some generator setups need the utility's approval before they are connected. Electricians who do this work handle the application.
Nearby, the same kind of help is available in Mesa, Paradise Valley and Gilbert.
Comparing quotes sensibly
Quotes that differ widely often assume different things: one counts a panel upgrade, another does not, or one includes the charger and another leaves it to you. Ask each electrician to describe the circuit size and route. The same description on two quotes makes the numbers comparable.
After the charger is on the wall
The electrician should show you how the breaker is labeled, how to reset the charger if it faults, and which settings control charging speed. Plug in the car and watch it start. If anything trips or runs warm, stop using it and call back rather than waiting for a pattern to develop.
When to stop and call
A charger that faults repeatedly, a breaker that trips each time you plug in, or a wall that feels warm behind the unit all point to a circuit issue. Unplug the car and leave it alone until an electrician checks. If you smell burning, leave the house and call 911.
Tempe at a glance
Calls come in from across Tempe, including around Interstate 10, US 60, Loop 101.
EV Charger Installation questions in Tempe
Do I need a permit to install an EV charger?
Does rooftop solar affect a charger install?
Who handles outages that interrupt charging?
Could an older home's wiring slow down a charger install?
More electrical services in Tempe
EV Charger Installation nearby
Helpful guides
Sources
Last updated: