Electrician referrals for Phoenix & nearby townsCall: (602) 584-7286
(602) 584-7286

Aluminum Wiring Repair in Tempe, AZ

electricianphoenixaz.net

Aluminum wiring is mostly a connection problem, and a local electrician can tell you what is needed for your Tempe home.

Inspector flagged aluminum wire in Tempe?
Call now to be connected with a local electrician in Tempe.
(602) 584-7286

Common repairs include adding approved connectors to join copper pigtails to aluminum wire, and using devices rated for aluminum. Some homeowners choose to rewire instead, and an electrician can explain the trade-offs. Call the number on this page to be connected with a local electrician in Tempe.

Connecting wires in an outlet box, aluminum wiring repair in Tempe, AZ

Is my house wired with aluminum?

Look at the cable in the attic or in the panel. Aluminum wire is silver-colored with markings such as AL on the jacket, while copper looks orange-brown. Houses from the mid-1960s into the mid-1970s are the usual suspects. If you are unsure, an electrician can confirm it quickly.

Solar and EV plans

Adding rooftop solar or an EV charger puts new demands on the panel and branch circuits. If the house uses aluminum branch wiring, an electrician will want to evaluate it first so a new load does not stress an already weak connection.

Homes from the 1980s sit close to the years aluminum branch wiring was used, so a quick look at the attic cable is a reasonable first step.

Service here comes from APS or SRP. Wiring repairs happen on the homeowner's side of the meter either way.

Call now to be connected with a local electrician in Tempe.
(602) 584-7286

Before electrical work starts in Tempe

Two utilities serve Tempe: APS and SRP. The name on your bill tells you which one to call when the power goes out; APS takes outage reports at 602-371-3680.

Two situations skip the electrician entirely: fire signs (smoke, sparks, a hot or burning odor), which mean leaving and calling 911, and downed lines, which mean staying about 100 feet back and calling 911 and the utility.

Electrical permits for Tempe addresses go through Tempe Building Safety. Panel and service upgrades, new circuits and generator hookups usually need one, followed by an inspection.

In Arizona, electrical contractors need a license from the Registrar of Contractors (ROC). Residential electrical work falls under the R-11 class, and the ROC's online contractor search shows whether a license is active.

Nearby, the same kind of help is available in Mesa, Paradise Valley and Gilbert.

What drives repair cost

The count of connections is the biggest factor. A house has an outlet, switch or fixture at every spot, and each one may need work. Size of the home, ease of access and the repair method all move the price, which is why an electrician usually inspects before quoting.

Questions to ask the pro

Ask which method is planned, how many connection points they expect to treat, whether the panel is included, whether a permit applies, and what they will do if they find other wiring problems. Check the ROC number before you agree to anything.

Why not just ignore it

Loose connections create heat inside walls where nobody sees it. Heat gradually degrades insulation and can ignite nearby material. That is why guidance from safety agencies has focused on the joints, and why an electrician treats a warm plate as a reason to move, not to wait.

More about Tempe

Calls come in from across Tempe, including around Interstate 10, US 60, Loop 101.

Aluminum Wiring Repair questions in Tempe

What are the repair options?
Common choices include copper pigtails with approved connectors, devices rated for aluminum, or replacing the circuits with copper. An electrician can explain which fits your house.
Can I replace the outlets myself?
Standard outlets are not meant for aluminum wire, and the wrong connection can make things worse. Leave this to an electrician.
What is pigtailing?
It means joining a short copper wire to each aluminum wire with an approved connector and then wiring the device to the copper. It moves the sensitive joint into a protected splice.
My house was built around 1983. Could it have aluminum wiring?
Homes of that age are close to the period it was used, so it is worth a quick check. An electrician can tell what wire is in the attic and panel.

More electrical services in Tempe

Aluminum Wiring Repair nearby

Call now to be connected with a local electrician in Tempe.
(602) 584-7286

Last updated:

☎ Call (602) 584-7286