Start with safety: keep everyone away from the problem, do not touch the panel and call 911 for fire or smoke. For a dead panel or a failed main, a qualified electrician is needed, and many electricians take after-hours calls. Call the number on this page to be connected with a local electrician in Tempe.

Is it urgent or can it wait until morning?
A single dead outlet or a bulb that flickers is usually a daytime job. A panel that is warm, a smell that will not go away or a sizzling sound is different, because heat inside a wall can ignite framing. If you are unsure, shut off the main only if it is dry and safe to reach, then phone for advice.
Older homes, older equipment
In homes of the 1960s and 70s, original panels, fuse boxes and aluminum branch wiring are common, and they age badly under today's loads. A house like this is more likely to produce a failed breaker or a burned connection. An electrician can say whether repair or replacement makes sense.
With a median build year near 1983, houses here are at the age when connections loosen and original equipment starts failing under heavy air conditioning load.
Service in Tempe is split between APS and SRP; knowing yours helps separate a utility outage from a fault in the house.
Local details for Tempe
Electric service here is split between APS and SRP, so check your bill before reporting an outage. APS's outage line is 602-371-3680.
Treat any fallen power line as live. APS and SRP both tell people to stay about 100 feet away and call 911. Inside the house, smoke or a hot burning odor from electrical equipment is also a 911 call, made from outside.
Electrical permits for Tempe addresses go through Tempe Building Safety. Panel and service upgrades, new circuits and generator hookups usually need one, followed by an inspection.
Arizona's handyman exemption does not cover jobs that need a permit, so panel work, new circuits and similar jobs belong with a contractor who holds an ROC electrical license (R-11 or CR-11).
Calls from Tempe are often matched with electricians who also cover Mesa, Paradise Valley and Gilbert.
Why panel and service damage costs more
A tripped breaker is a small repair. A scorched bus bar, a burned meter base or a failed main can mean replacing major equipment, and in some cases the utility has to disconnect and reconnect power. Those pieces add parts, labor and scheduling.
What the electrician looks at first
Expect a check of the main panel, the meter connection, the breaker that tripped and the circuit that failed. A thermal reading or a visual check of lugs and bus bars shows scorching. They will explain whether the cause is wiring, equipment or load before suggesting repairs.
Do these things first
- Get everyone away from the problem.
- If there is smoke, fire or a burning smell, leave and call 911.
- Do not touch a hot or wet panel.
- Turn off appliances you can reach safely.
- Then call an electrician.
Anything that seems worse than it did earlier deserves a fresh call.
Tempe at a glance
Calls come in from across Tempe, including around Interstate 10, US 60, Loop 101.
Emergency Electrician questions in Tempe
What should I do first in an electrical emergency?
Is this service an electrical contractor?
Why do electrical problems spike in summer?
Who do I call about a power outage in my area?
More electrical services in Tempe
Emergency Electrician nearby
Helpful guides
Sources
Last updated: