Electrician referrals for Phoenix & nearby townsCall: (602) 584-7286
(602) 584-7286

Generator Installation in San Tan Valley, AZ

electricianphoenixaz.net

A generator is only as safe as its connection, so San Tan Valley homeowners start with a transfer switch.

Looking to keep the AC running in San Tan Valley during an outage?
Call now to be connected with a local electrician in San Tan Valley.
(602) 584-7286

Most Valley homes want a generator to keep the fridge, lights and some cooling running during a summer outage. The electrician adds up those loads and recommends a size, a transfer method and a placement away from doors and windows. Call the number on this page to be connected with a local electrician in San Tan Valley.

Standby generator beside a home, generator installation in San Tan Valley, AZ

What the electrician actually installs

The visible part is the generator; the electrical work is the transfer switch, new breakers, conduit, the connection between the generator and the panel, and sometimes a gas line coordinated with a plumber. The inspector looks at all of it. Skipping the permit can cause trouble later, especially at resale.

Monsoon season and the Valley grid

July through September brings lightning, wind and dust that can topple lines or trip substations, and storm outages in San Tan Valley can last from minutes to long stretches. A generator is insurance for the stretch that no one can predict. Planning before the storm is better than shopping while the lights are out.

Call now to be connected with a local electrician in San Tan Valley.
(602) 584-7286

Standby usually costs more than portable

A standby system includes the generator, an automatic transfer switch, a pad, a fuel connection and more conduit. A portable setup mainly needs an inlet and an interlock or manual switch, with the generator purchased separately. Many owners start with a portable setup and move to standby later if the budget allows.

Local details for San Tan Valley

Outages are reported to the utility named on your electric bill (in this part of the Valley that is usually APS or SRP), not to an electrician.

Safety comes first: a burning smell, smoke or sparks from wiring means leave the house and call 911. A downed line is the utility's job, never an electrician's; keep 100 feet back, call 911 and then report it to the utility.

Permitted electrical work in San Tan Valley is inspected by Pinal County Building Safety. The contractor normally applies and schedules the inspection.

The Arizona Registrar of Contractors issues electrical licenses and lets anyone check a contractor's status online. A one-minute lookup before signing is worth it.

Work on the meter or service entrance also involves the utility, which controls the meter and must approve service changes. Your electrician coordinates that step.

Calls from San Tan Valley are often matched with electricians who also cover Queen Creek, Apache Junction and Chandler.

If you already own a portable generator

Bring the model and the output plug type to the electrician. They can install a matching inlet and an interlock or transfer switch so the existing unit can safely power chosen circuits. Many portables work well with that setup, as long as they are sized for what you plan to run.

Carbon monoxide is the first rule

Generators produce deadly carbon monoxide, which is why they must run outside, well away from doors, windows and vents, and never in a garage or carport that is attached to the house. Install CO alarms inside. If anyone feels dizzy, nauseated or faint during an outage, go outside and call 911.

More about San Tan Valley

Calls come in from across San Tan Valley, including around Johnson Ranch, Pecan Creek South, San Tan Heights.

Rapid growth since 2000 has produced mostly planned-community housing, so most homes are newer construction.

Generator Installation questions in San Tan Valley

Do I need a permit to install a generator?
Usually yes. A transfer switch and generator connection normally need a permit and inspection through Pinal County Building Safety, and the electrician typically handles it.
Where can a generator be placed?
Outdoors, away from doors, windows and vents, with clearances set by code. Never inside a garage, carport or shed attached to the house.
Can I install the transfer switch myself?
That is not a good idea. It involves working inside the panel and a mistake can start a fire or endanger others. A permit and an electrician keep it safe.
Does the generator need natural gas?
Not always. Standby units run on natural gas or propane, and portables usually run on gasoline or propane. Gas connections often need a separate contractor.

More electrical services in San Tan Valley

Generator Installation nearby

Call now to be connected with a local electrician in San Tan Valley.
(602) 584-7286

Last updated:

☎ Call (602) 584-7286