The meter base, also called the meter socket, is the box on the outside of the house that holds the utility's meter. The electrician repairs the base and wiring on your side, while the utility removes and reinstalls the meter itself. Call the number on this page to be connected with a local electrician in Scottsdale.

What a damaged meter base looks like
Cracked or melted plastic, black scorch marks, rust streaks, a cover that will not seat and a box pulling away from the wall are the usual signs. A meter that is crooked or loose in its socket also points to a worn base. Look from a distance and do not touch.
New loads, old base
Meter bases have an amp rating, and adding solar, a charger or a second AC can push a base beyond its limit. If the rating is too low or the base is damaged, it may need replacement before other upgrades can go forward.
Houses from the 1990s, typical here, often still have the original meter base, which is worth a close look if the cover is brittle or discolored.
Because APS and SRP both serve Scottsdale, check your bill before scheduling so the electrician works with the correct utility.
Utility and electrician each have a part
The electrician bills for the base, the work on your side and the permit. The utility handles pulling and reinstalling the meter and may have its own requirements. Ask the electrician what to expect so you can plan the sequence and any related costs.
Who to call for what in Scottsdale
Electric service here is split between APS and SRP, so check your bill before reporting an outage. APS's outage line is 602-371-3680.
If you see sparks, smoke or flames, or smell something burning from an outlet, switch or panel, get everyone out and call 911 before anything else. For a power line on the ground, stay at least 100 feet away, call 911, then call the utility.
Permitted electrical work in Scottsdale is inspected by Scottsdale's One Stop Shop permit center. The contractor normally applies and schedules the inspection.
Arizona's handyman exemption does not cover jobs that need a permit, so panel work, new circuits and similar jobs belong with a contractor who holds an ROC electrical license (R-11 or CR-11).
Work on the meter or service entrance also involves the utility, which controls the meter and must approve service changes. Your electrician coordinates that step.
Nearby, the same kind of help is available in Paradise Valley, Fountain Hills and Mesa.
What the electrician checks
Besides the base, the electrician looks at the service wires, the main disconnect, the ground connection and the mast or conduit. Finding a problem in one place often reveals another. A thorough check helps keep the new base from failing the same way again.
Look from a safe distance
Periodically glance at the meter from a few steps away. Watch for discolored plastic, rust, moisture and a mast that has shifted. Spotting a problem early lets you schedule a repair on your terms, rather than during a summer outage or after a failure.
More about Scottsdale
Calls come in from across Scottsdale, including around Indian School Road, Chaparral Road, Scottsdale Water Campus.
Village Grove 1-6 and Town and Country Scottsdale are 1950s neighborhoods designated as historic districts, with older homes where original wiring may remain.
Meter Base & Service Mast Repair questions in Scottsdale
Why did the utility tag my meter?
Will stucco need patching after the work?
Can a meter base problem cause flickering lights?
Who do I call to have the meter pulled?
More electrical services in Scottsdale
Meter Base & Service Mast Repair nearby
Helpful guides
Sources
Last updated: